4oz Multilayer FR4 PCB Board a cikin ENIG da ake amfani dashi a Masana'antar Makamashi tare da IPC Class 3
Bayanin masana'anta
| Model No. | PCB-A9 |
| Kunshin sufuri | Marufi Packing |
| Takaddun shaida | UL, ISO9001&ISO14001, RoHS |
| Aikace-aikace | Kayan lantarki masu amfani |
| Mafi ƙarancin sarari/Layi | 0.075mm/3mil |
| Ƙarfin samarwa | 50,000 sqm/wata |
| HS Code | Farashin 85340090 |
| Asalin | Anyi a China |
Bayanin Samfura
Gabatarwa FR4 PCB
Ma'anarsa
FR yana nufin "mai kare harshen wuta," FR-4 (ko FR4) shine ƙimar darajar NEMA don kayan haɓakar gilashin epoxy laminate, wani abu mai haɗaka wanda ya ƙunshi zanen fiberglass ɗin da aka saka tare da mai ɗaure resin epoxy wanda ya sa ya zama kyakkyawan tsari don kayan lantarki. a kan allo da aka buga.
Ribobi da Fursunoni na FR4 PCB
Kayan FR-4 ya shahara sosai saboda kyawawan halaye masu yawa waɗanda za su iya amfanar allon da'ira.Baya ga kasancewa mai araha kuma mai sauƙin aiki tare da shi, injin insulator ne mai ƙarfi mai ƙarfi mai ƙarfi.Bugu da kari, yana da dorewa, mai jurewa danshi, juriya da zafi da nauyi.
FR-4 abu ne mai dacewa da yadu, sanannen galibi don ƙarancin farashi da kwanciyar hankali na inji da na lantarki.Duk da yake wannan kayan yana da fa'idodi masu yawa kuma yana samuwa cikin nau'ikan kauri da girma dabam, ba shine mafi kyawun zaɓi ga kowane aikace-aikacen ba, musamman manyan aikace-aikacen mitoci kamar RF da ƙirar microwave.
Tsarin PCB Multi-Layer
Multilayer PCBs yana ƙara haɓaka da ƙima da ƙima na ƙirar PCB ta ƙara ƙarin yadudduka sama da yadudduka na ƙasa waɗanda aka gani a alluna masu gefe biyu.Multilayer PCBs an gina su ta hanyar laminating nau'ikan yadudduka daban-daban.Yadudduka na ciki, yawanci allunan da'ira mai gefe biyu, ana tattara su tare, tare da insulating yadudduka a tsakanin da tsakanin tagulla-foil don manyan yadudduka na waje.Ramukan da aka tona ta cikin allo (vias) za su yi haɗin gwiwa tare da nau'ikan allon daban-daban.
Fasaha & iyawa
| Abu | Ƙarfin samarwa |
| Ƙididdigar Layer | 1-20 yadudduka |
| Kayan abu | FR-4, CEM-1 / CEM-3, PI, High Tg, Rogers, PTEF, Alu / Cu Base, da dai sauransu |
| Kaurin allo | 0.10mm-8.00mm |
| Mafi Girma Girma | 600mmX1200mm |
| Haƙuri na Ƙimar allo | + 0.10mm |
| Haƙurin kauri (t≥0.8mm) | ± 8% |
| Haƙurin Kauri (t <0.8mm) | ± 10% |
| Insulation Layer Kauri | 0.075mm - 5.00mm |
| Mafi ƙarancin Layi | 0.075mm |
| Mafi ƙarancin sarari | 0.075mm |
| Out Layer Copper Kauri | 18 - 350 |
| Ciki Layer Copper Kauri | 17 - 175 pm |
| Ramin Hakowa (Mechanical) | 0.15mm - 6.35mm |
| Ƙarshen Ramin (Mechanical) | 0.10mm-6.30mm |
| Haƙuri na Diamita (Mechanical) | 0.05mm |
| Rijista (Makanikanci) | 0.075mm |
| Halayen Rabo | 16:1 |
| Nau'in Mashin Solder | LPI |
| SMT Mini.Nisa Mashin Solder | 0.075mm |
| Mini.Solder Masks | 0.05mm |
| Toshe Ramin Diamita | 0.25mm - 0.60mm |
| Hakuri na sarrafa impedance | ± 10% |
| Ƙarshe / magani | HASL, ENIG, Chem, Tin, Flash Gold, OSP, Yatsar Zinare |
Lokacin Jagorar Q/T
| Kashi | Mafi Saurin Jagoranci | Lokacin Jagoranci na al'ada |
| Mai gefe biyu | 24h | 120h |
| 4 Layer | 48h ku | 172 h |
| 6 Layers | 72h ku | 192 h |
| 8 Layers | 96h ku | 212h |
| 10 Layers | 120h | 268h ku |
| 12 Layers | 120h | 280h |
| 14 Layers | 144h | 292h ku |
| 16-20 Layers | Ya dogara da takamaiman buƙatun | |
| Sama da Layers 20 | Ya dogara da takamaiman buƙatun | |
Motsi na ABIS don sarrafa FR4 PCBS
Shiri Ramin
Cire tarkace a hankali & daidaita ma'aunin injin rawar soja: kafin a saka ta tare da jan karfe, ABIS yana ba da kulawa sosai ga duk ramuka akan FR4 PCB da aka bi da shi don cire tarkace, rashin daidaituwa na saman, da smear epoxy, ramukan mai tsabta suna tabbatar da plating cikin nasara a manne ga bangon rami. .Hakanan, a farkon aiwatarwa, ana daidaita ma'aunin injin rawar soja daidai.
Shirye-shiryen Sama
Deburing a hankali: ƙwararrun ma'aikatan fasahar mu za su sani kafin lokaci cewa hanya ɗaya tilo don guje wa mummunan sakamako ita ce tsammanin buƙatar kulawa ta musamman da ɗaukar matakan da suka dace don tabbatar da cewa an yi aikin a hankali kuma daidai.
Ƙididdigar Ƙarfafawar thermal
An saba da ma'amala da kayan daban-daban, ABIS zai iya yin nazarin haɗuwa don tabbatar da cewa ya dace.sa'an nan kuma kiyaye amincin dogon lokaci na CTE (ƙididdigar haɓakawar thermal), tare da ƙananan CTE, ƙananan yuwuwar da aka sanya ta cikin ramuka za su gaza daga maimaita jujjuyawar jan ƙarfe wanda ke haifar da haɗin gwiwar Layer na ciki.
Sikeli
ABIS yana sarrafa kewayawa yana haɓaka ta hanyar sanann kashi cikin tsammanin wannan asarar ta yadda yadudduka za su dawo zuwa girman da aka ƙera su bayan an gama zagayowar lamination.Har ila yau, ta yin amfani da shawarwarin sikeli na masana'anta na laminate a haɗe tare da bayanan sarrafa tsarin ƙididdiga na cikin gida, don buga abubuwan sikelin da za su yi daidai da lokaci a cikin wannan yanayin masana'anta.
Machining
Lokacin da lokacin gina PCB ɗinka ya yi, ABIS ka tabbata cewa ka zaɓa yana da kayan aiki masu dacewa da ƙwarewa don samar da shi daidai a farkon gwaji.
Nunin Samfurin & Kayan Aikin PCB
PCB mai ƙarfi, PCB mai sassauƙa, PCB mai ƙarfi-Flex, HDI PCB, Majalisar PCB
ABIS Quality Mission
LISTAI na kayan aiki na ci gaba
| Gwajin AOI | Bincika don sayar da mannaChecks don abubuwan da suka rage zuwa 0201 Bincika don abubuwan da suka ɓace, biya diyya, sassan da ba daidai ba, polarity |
| Binciken X-ray | X-Ray yana ba da ingantaccen dubawa na: BGAs/Micro BGAs/ Kunshin sikelin Chip / Allolin Bare |
| Gwajin cikin-Circuit | Gwajin cikin-Circuit yawanci ana amfani da shi tare da AOI rage lahani na aiki wanda ya haifar da matsalolin sassan. |
| Gwajin Ƙarfi | Babban Aikin GwajinFlash Shirye-shiryen Na'urar Gwajin aiki |
IOC mai shigowa dubawa
SPI solder dubawa
Binciken AOI na kan layi
SMT labarin farko dubawa
Kima na waje
X-RAY-welding dubawa
BGA na'urar sake yin aiki
Binciken QA
Anti-static warehousing da kaya
Pukarar 0% akan inganci
Duk sashen yana aiwatarwa bisa ga ISO kuma sashin da ke da alaƙa dole ne ya ba da rahoton 8D idan kowane kwamiti ya rushe zuwa mara kyau.
Duk allunan masu fita dole ne a gwada su 100% na lantarki, gwajin rashin ƙarfi da siyarwa.
Duban gani, muna yin binciken microsection kafin jigilar kaya.
Horar da tunanin ma'aikata da al'adun kasuwancinmu, sanya su farin ciki da aikinsu da kamfaninmu, yana taimaka musu wajen samar da kayayyaki masu inganci.
Babban ingancin albarkatun kasa (Shengyi FR4, ITEQ, Taiyo Solder Mask Tawada da sauransu)
AOI na iya duba duk saitin, ana duba allon allon bayan kowane tsari
Takaddun shaida
FAQ
Don tabbatar da ingantacciyar magana, tabbatar da haɗa waɗannan bayanan don aikinku:
Cikakkun fayilolin GERBER gami da jerin BOM
l Yawan
l Juya lokaci
l Bukatun Taimako
l Abubuwan Bukatun
l Gama bukatun
l Za a isar da ƙimar ku ta al'ada a cikin sa'o'i 2-24 kawai, dangane da rikitaccen ƙira.
Kowane Abokin ciniki zai sami siyarwa don tuntuɓar ku.Lokacin aikinmu: 9:00 na safe - 19:00 (Lokacin Beijing) daga Litinin zuwa Juma'a.Za mu ba da amsa ga imel ɗin ku da sauri yayin lokacin aikinmu.Kuma kuna iya tuntuɓar tallace-tallacenmu ta wayar salula idan gaggawa.
ISO9001, ISO14001, UL USA & USA Canada, IFA16949, SGS, RoHS rahoton.
Hanyoyin Tabbatar da Ingancin Mu kamar haka:
a), Duban gani
b), Bincike mai tashi, kayan aiki mai ƙarfi
c), Gudanar da impedance
d), Gano iyawar solder
e), Digital Metallo Gragic microscope
f), AOI (Binciken gani mai sarrafa kansa)
Ee, mun yi farin cikin samar da samfuran samfuri don gwadawa da duba ingancin, ana samun odar samfurin gauraya.Lura ya kamata mai siye ya biya kuɗin jigilar kaya.
Adadin bayarwa akan lokaci ya fi 95%
a), 24 hours juyi sauri don PCB samfurin gefe biyu
b), 48hours na 4-8 yadudduka samfurin PCB
c), awa 1 don ambato
d), awanni 2 don tambayar injiniyan / amsa koke
e), 7-24 hours don goyon bayan fasaha / sabis na oda / ayyukan masana'antu
ABIS ba zai taɓa zaɓar oda ba.Dukansu Kananan umarni da umarni na jama'a suna maraba kuma Mu ABIS za mu kasance da gaske da alhakin, kuma mu bauta wa abokan ciniki tare da inganci da yawa.
ABlS yana yin 100% na gani da dubawar AOl da kuma yin gwajin lantarki, gwajin ƙarfin lantarki mai ƙarfi, gwajin sarrafa impedance, ƙaramin yanki, gwajin girgiza zafi, gwajin solder, gwajin aminci, gwajin juriya, gwajin tsabtace ionic da gwajin Aiki na PCBA.
a), Fitowar sa'a 1
b), sa'o'i 2 na amsa korafi
c), 7 * 24 hours goyon bayan fasaha
d), 7*24 sabis na oda
e), 7*24 hours bayarwa
f), 7*24 samar da gudu
| Ƙarfin samarwa na samfuran siyarwa mai zafi | |
| Biyu Side/Multilayer PCB Workshop | Aluminum PCB Workshop |
| Ƙarfin Fasaha | Ƙarfin Fasaha |
| Raw kayan: CEM-1, CEM-3, FR-4 (High TG), Rogers, TELFON | Raw kayan: Aluminum tushe, Copper tushe |
| Layer: Layer 1 zuwa Layer 20 | Layer: 1 Layer da 2 Layer |
| Nisa Min. layi: 3mil/3mil(0.075mm/0.075mm) | Nisa Min. layi: 4mil/4mil(0.1mm/0.1mm) |
| Min. Girman rami: 0.1mm (ramin dirilling) | Min.Girman rami: 12mil (0.3mm) |
| Max.Girman allo: 1200mm* 600mm | Girman allo: 1200mm* 560mm(47in* 22in) |
| Ƙarshen katako: 0.2mm-6.0mm | Ƙarshen katako: 0.3 ~ 5mm |
| Kauri na jan karfe: 18um ~ 280um (0.5oz ~ 8oz) | Kauri na jan karfe: 35um ~ 210um (1oz ~ 6oz) |
| Haƙurin Ramin NPTH: +/- 0.075mm, Haƙuri na PTH: +/- 0.05mm | Haƙuri na matsayi na rami: +/- 0.05mm |
| Haƙuri na Shaci: +/- 0.13mm | Haƙuri na keɓancewa: +/ 0.15mm;Haƙuri na naushi: +/ 0.1mm |
| An gama saman: HASL mara gubar, zinari mai nutsewa (ENIG), azurfar nutsewa, OSP, platin gwal, yatsa na gwal, Carbon INK. | An gama saman: HASL kyauta, zinare mai nutsewa (ENIG), azurfa immersion, OSP da sauransu |
| Haƙuri na sarrafa impedance: +/- 10% | Haƙuri na kauri: +/- 0.1mm |
| Ƙarfin samarwa: 50,000 sqm / watan | MC PCB Samar da iyawar: 10,000 sqm/month |
